3
Hot tub performance parameters
1 Hot tub performance parameters
1 1
Performance parameters of CELTIC SPAS hot tubs
Performance parameters
rated voltage:
three-phase 400 V 50/60 Hz*
maximum working current:
3 × 16 A
voltage resistance:
1 250 V/min without breakdown
insulation resistance:
>= 200 M Ω
water resistance (cover):
IPX5
protection against electric shock:
first stage
* It can also be set to 230 V, but this is not recommended due to possible function
limitations
Load capacity
heating:
230 V/3 kW/13 6 A
ozone:
230 V/50 – 60 Hz /80 mA
blower:
230 V/0 66 kW/6 3 A
pump 1/2:
2 2 kW
total input power (depending on type of hot tub):
6 26 kW / h
protection class:
I
lighting:
LED 12 V alternating /10 W
maximum output power:
20 W
moisture resistant speakers:
yes
Preparation and possibilities of electrical connection
– alternating three-phase current 3 × 400 V/16 A/20 A
Ensure that the hot tub is always connected to a circuit protected by a residual-current
protector with a residual current of 0.03 A. If the circuit breaker needs to be replaced,
it is necessary to use a circuit breaker with the same type of rated value.
For your own safety and the safety of your product, please observe the following
instructions. Read the following information carefully and follow the user manual
exactly when using the hot tub to avoid damaging the product or the risk of injury.
This appliance is intended for use by children 8 years of age or older with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
provided they are under supervision or have been instructed on the use of the
product and understand the risks Children must not play with the product
Cleaning and maintenance must not be performed by children without supervision.
Summary of Contents for TP 500
Page 1: ...USER MANUAL TP 500 ...
Page 23: ...23 11 Notes Notes ...