HANSCRAFT TP 500, User Manual

Page: 11 / 24

11
Unlocking the control panel
To unlock all locks, hold down the up arrow (WARM) while pressing the MENU button
twice slowly.
5.9 HOLD (hold mode – M037)
Hold mode is used to disconnect pumps during service work, such as cleaning or filter
replacement. Hold mode lasts 1 hour, unless it is discontinued manually. If servicing
the hot tub requires more time, it is better to turn off the power supply to the hot tub.
You can access this setting by pressing MENU 6× + up arrow (WARM).
You can tell that the mode is active by the text
HOLDING FOR 59:00
on the panel
(countdown of time for which the hold mode will be active). You can cancel hold
mode with the up/down arrow (WARM/COOL) or by pressing MENU.
5 10 Filtration
Control panel TP500 has two filtration cycles, 1 and 2. Each filtration cycle is set
separately. Basically, the start time and duration are set, and the end time is displayed
by the panel itself.
a) Filtration cycle 1
(MENU 7× + arrow to
FLTR )
Control panel
MENU
MENU
2×
7×
WARM
/ /
FLTR
6×
HOLDING FOR 59:00
WARM MENU
MENU
( )
WARM
(hold)
WARM