35
English
Ø 10
Ø10
Ø10
570 mm
570 mm
200
SW 13
Ø8
Look out for any pipes or electric cables
(underfloor heating).
Mounting shower tray feet
Screw feet to the shower tray and pre-set at 200 mm.
If the optional plinth is used secure its magnet holders on
the 4 front feet. Adjust height of shower tray to plinth.
Assembling waste
Mounting waste in accordance with added assembling
instruction. Mounting bent outlet and position it. Turn
shower tray feet to get the required height.
Fixing and positioning the shower tray
Position shower tray and align horizontally. Using a spirit
level diagonally across the tray to the bases of the
columns and the bases of the wall profiles.. Mark fitting
points to the wall.
Corner version: Ensure that the tray is positioned excatly in
line with the corner.
Counter feet.!
Mark fitting positions on the ground and remove the
shower tray. Drill Ø10 holes at fixing points on wall, and
Ø8 holes in floor. Insert dowels supplied.
Connect waste pipe and check for leaks.
Check postion and level of the shower tray!
Re-position shower tray. Secure shower tray to the wall
with 2 hexagonal wood screws 8x60 use slide discs and
washers, and tighten. Secure to the floor via the fixing
plate and the hexagonal wood screws 6x50.
Do not brick in the shower tray until the Dusch-
tempel
®
is completely assembled. If a plinth will
be used the bricking in of the shower tray is
not required.
E r e c t i n g s h o w e r t r a y
