34
English
You will need following tools
Spirit level minimum 1,15 m long
Hammer
Engineers wrench, 27, 19, 13 and 10 mm
Punch
Phillips screw driver, size 2
Drill machine
Stone drill bit Ø6, Ø8 und Ø10 mm
Allen key 2, 4 und 6 mm
Twist drill Ø 3
T o o l s / F i x i n g s
Do not brick in the shower tray until the Shower Temple is completely assembled and all
water inlets and outlets have been thoroughly tested for possible leaks.
Do not install the transformer underneath the shower tray! The plug and the transformer must
always be accessible.
Accident prevention: Please stick the enclosed anti-slip sticker in the shower tray! The surface
needs to be clean, dry and free from grease.
Flush through the supply pipes!
After assembly the Shower Temple should be adjusted to the local conditions by thermostat
alignment/motor alignment. The performing is described in chapter “Operating and servicing".
Fixings
The fixings are in pack 1.
12x
Phillips wood screws 4x35 with dowel Ø 6
for wall profiles
im Bohren auf Rohrleitungen (z. B.
2x
nut M6,screw M6x20 with
washer A6,4 for roof installation
6x
Counter sunk screws 4,2x13 for wall
compensating ledge fxing
22x
Self tapping screw 4,2x13 for rear wall fixing
2x
Lag screw 8x60,
Washer A8,5,
Plastic washer and dowel Ø 10 for mounting
shower tray
4x
Plastic eccenter disc for fixing glass side panels
8x
Plastic cover for covering fixing elements at doors
and side glass panels.
4x
Plastic cover with cutted edge for covering inner
door fixing.
