background image

13

When the 

off-line

 

graph

 is displayed:

• Use the arrow keys to move along the X (Time) and Y (parameter) axes of the graph.

• Press 

 to access the zoom menu for X and Y axes. Use 

 or 

 / 

 / 

 to switch between the active zooming axes. Press 

 or 

 to zoom the selected axis.

Note

: While in zoom graph menu the 

 key is not accessible.

• Press 

 to return to the main menu.

Log History

The measurement, along with 

LOG History

, will be visible when this option is selected:

1)  The last stored logged data (Not actively logging) or
2)  The last data logged from an active logging lot or
3)  An empty display - NO LOTS saved, NOT currently logging
The log history list also contains the appropriate mV values, the logged temperature, the temperature probe
status source, as well as the records time stamp.
To access the Log History display option:

• Press 

 while in 

Measure

 mode. The “

Choose Display Configuration

” message will be

displayed in the Reminder messages area.

• Press 

. The instrument will display the log history regarding the selected 

Measure

 mode.

Notes:

• When an alarm condition is active, all logged records will have an exclamation mark “

!

”.

• If logged in Auto Hold, logged records will have an “

H

”.

• If another 

Measure

 mode is selected, the Log History will reset.

• If the temperature unit is changed, all logged temperature values will be automatically displayed

in the new temperature unit.

68

pH BUFFER TEMPERATURE DEPENDENCE

Temperature has an effect on pH. The calibration buffer solutions are affected by temperature changes to a
lower degree than normal solutions.
During calibration the instrument will automatically calibrate to the pH value corresponding to the measured
or set temperature.

During calibration the instrument will display the pH buffer value at 25 °C.

P

M

E

T

S

R

E

F

F

U

B

H

p

C

°

K

°

F

°

9

7

6

.

1

0

0

0

.

3

0

1

0

.

4

2

6

8

.

6

0

1

0

.

7

7

7

1

.

9

0

1

0

.

0

1

4

5

4

.

2

1

0

3

7

2

2

3

0

7

6

.

1

2

7

0

.

3

7

0

0

.

4

2

8

9

.

6

0

3

1

.

7

9

5

4

.

9

6

1

3

.

0

1

9

7

3

.

3

1

5

8

7

2

1

4

0

7

6

.

1

1

5

0

.

3

2

0

0

.

4

9

4

9

.

6

8

9

0

.

7

1

9

3

.

9

5

4

2

.

0

1

8

7

1

.

3

1

0

1

3

8

2

0

5

1

7

6

.

1

3

3

0

.

3

0

0

0

.

4

1

2

9

.

6

0

7

0

.

7

8

2

3

.

9

0

8

1

.

0

1

5

8

9

.

2

1

5

1

8

8

2

9

5

3

7

6

.

1

9

1

0

.

3

1

0

0

.

4

7

9

8

.

6

6

4

0

.

7

3

7

2

.

9

8

1

1

.

0

1

9

9

7

.

2

1

0

2

3

9

2

8

6

5

7

6

.

1

8

0

0

.

3

4

0

0

.

4

8

7

8

.

6

7

2

0

.

7

2

2

2

.

9

2

6

0

.

0

1

1

2

6

.

2

1

5

2

8

9

2

7

7

9

7

6

.

1

0

0

0

.

3

0

1

0

.

4

2

6

8

.

6

0

1

0

.

7

7

7

1

.

9

0

1

0

.

0

1

0

5

4

.

2

1

0

3

3

0

3

6

8

3

8

6

.

1

5

9

9

.

2

7

1

0

.

4

1

5

8

.

6

8

9

9

.

6

7

3

1

.

9

2

6

9

.

9

6

8

2

.

2

1

5

3

8

0

3

5

9

8

8

6

.

1

1

9

9

.

2

6

2

0

.

4

2

4

8

.

6

9

8

9

.

6

8

0

1

.

9

9

1

9

.

9

8

2

1

.

2

1

0

4

3

1

3

4

0

1

3

9

6

.

1

0

9

9

.

2

7

3

0

.

4

7

3

8

.

6

3

8

9

.

6

9

6

0

.

9

1

8

8

.

9

8

7

9

.

1

1

5

4

8

1

3

3

1

1

0

0

7

.

1

0

9

9

.

2

9

4

0

.

4

4

3

8

.

6

9

7

9

.

6

0

4

0

.

9

7

4

8

.

9

4

3

8

.

1

1

0

5

3

2

3

2

2

1

7

0

7

.

1

1

9

9

.

2

2

6

0

.

4

4

3

8

.

6

8

7

9

.

6

4

1

0

.

9

7

1

8

.

9

7

9

6

.

1

1

5

5

8

2

3

1

3

1

5

1

7

.

1

3

9

9

.

2

6

7

0

.

4

6

3

8

.

6

9

7

9

.

6

0

9

9

.

8

3

9

7

.

9

6

6

5

.

1

1

0

6

3

3

3

0

4

1

4

2

7

.

1

5

9

9

.

2

1

9

0

.

4

9

3

8

.

6

2

8

9

.

6

9

6

9

.

8

3

7

7

.

9

2

4

4

.

1

1

5

6

8

3

3

9

4

1

4

3

7

.

1

8

9

9

.

2

7

0

1

.

4

4

4

8

.

6

7

8

9

.

6

8

4

9

.

8

7

5

7

.

9

3

2

3

.

1

1

0

7

3

4

3

8

5

1

4

4

7

.

1

0

0

0

.

3

3

2

1

.

4

0

5

8

.

6

3

9

9

.

6

9

2

9

.

8

6

4

7

.

9

1

1

2

.

1

1

5

7

8

4

3

7

6

1

5

5

7

.

1

2

0

0

.

3

9

3

1

.

4

7

5

8

.

6

1

0

0

.

7

0

1

9

.

8

0

4

7

.

9

4

0

1

.

1

1

0

8

3

5

3

6

7

1

7

6

7

.

1

3

0

0

.

3

6

5

1

.

4

5

6

8

.

6

0

1

0

.

7

1

9

8

.

8

8

3

7

.

9

3

0

0

.

1

1

5

8

8

5

3

5

8

1

0

8

7

.

1

2

0

0

.

3

2

7

1

.

4

3

7

8

.

6

9

1

0

.

7

1

7

8

.

8

0

4

7

.

9

8

0

9

.

0

1

0

9

3

6

3

4

9

1

3

9

7

.

1

0

0

0

.

3

7

8

1

.

4

0

8

8

.

6

9

2

0

.

7

1

5

8

.

8

8

4

7

.

9

9

1

8

.

0

1

5

9

8

6

3

3

0

2

7

0

8

.

1

6

9

9

.

2

2

0

2

.

4

8

8

8

.

6

0

4

0

.

7

9

2

8

.

8

9

5

7

.

9

4

3

7

.

0

1

Summary of Contents for HI 5221









































Reviews: