![background image](http://html2.mh-extra.com/html/hanna-instruments/hi98194/hi98194_instruction-manual_3678954024.webp)
47
46
8.1.11 Language
The language used in the meter user interface can
be changed. The default language is English.
Please contact your local Hanna office for currently
available languages.
8.1.12 Restore Factory Settings
This function restores measurement settings
to their original factory values. This includes
measurement units, coefficients, other measurement
configurations and all logged data. The factory
calibration for the sensor channels is not affected.
• Select the “Restore factory settings” and press
Select
.
• The meter will ask to confirm: press
Yes
to confirm or
No
to escape.
8.2 PROBE SETUP
8.2.1 Probe ID
The probe can be labeled with an identification
code: press
Modify
and a text box will be displayed.
Use the keypad to enter the desired alphanumeric
code and then press
Accept
.
A maximum of 14 characters can be used.
8.1.8 LCD Backlight Intensity
The LCD backlight intensity can be adjusted with
this function. Use the arrow keys to change the level
and press
Accept
to save the new value. The default
value is 7.
8.1.9 Meter Password
The Meter Password protects against unauthorized configuration changes and
log data erasure. When implemented, many setting and functions cannot be
modified or viewed.
To enable the password proceed as follows:
• Highlight “Meter Password” and press
Modify
.
• Enter the desired password in the text box and press
Accept
.
Note
While typing, the characters are masked with a “*” (star) symbol.
• The meter will require password confirmation. Retype the same password and
press
Accept
to confirm.
• The meter returns to the “Meter Setup” menu. The checkbox corresponding to
the meter password is checked.
To disable the password protection highlight “Meter Password” and press
Modify
,
enter the password and then press
Disable
. “No password” appears in the text
box. Press
Accept
to confirm.
8.1.10 Meter ID
The Meter ID may be used to uniquely identify a
meter/operator. Press
Modify
and a text box appears.
Use the keypad to insert the desired alphanumeric
ID and press
Accept
to store the identification. A
maximum of 14 characters can be used.