background image

1

PRELIMINARY EXAMINATION

Remove the instrument from the packing ma-
terial and examine it carefully to make sure
that no damage has occurred during ship-
ping. If there is any damage, notify your
Dealer.

In addition to this instruction manual you will
also find:

Printing Thermometer

HI 762BL Temperature Probe (one chan-
nel version only)

Paper Rolls (5 pcs)

AA size Batteries (4 pcs)

Rugged Carrying Case

Note: Save all packing material until you are

sure that the instrument functions cor-
rectly. All defective items must be re-
turned in its original packaging together
with the supplied accessories.

The Hanna Instruments portable thermom-
eters with built-in printers are microproces-
sor-based and enable you to accurately mea-
sure temperature and record data.

The instrument housing is made of rugged
and lightweight material.

Equipped with a large, easy-to-read LCD, the
units feature an extended battery life and a
special design that enables results to be
obtained even in humid, wet or dusty condi-
tions.
Measurements can be performed with lab-
grade precision in the field as well as in the
laboratory without compromising accuracy. A
12VDC adapter can also be used to power
the unit for extended use.

GENERAL DESCRIPTION

Summary of Contents for HI 92710













































Reviews: