background image

35

34

HI 762PG

Penetration

 probe with 1 m (3.3') cable and

green

 handle

HI 762PG/10 Penetration

 probe with 10 m (33') cable and

green

 handle

HI 762PR

Penetration

 probe with 1 m (3.3') cable and 

red

handle

HI 762PR/10 Penetration

 probe with 10 m (33') cable and 

red

handle

HI 762PW

Penetration

 probe with 1 m (3.3') cable and 

white

handle

HI 762PW/10 Penetration

 probe with 10 m (33') cable and

white

 handle

HI 762W

Wire 

probe, without handle 

(hard-to-reach places)

with 1 m (3.3') cable

HI 762W/10 Wire 

probe, without handle 

(hard-to-reach places)

with 10 m (33') cable

HANNA INSTRUMENTS TEMPERATURE PROBES

R.H. PROBES

Hanna Instruments Relative Humidity probes use a high-tech Thin-
Film Polymer Capacitance humidity sensor. This sensor provides rapid
response and high accuracy. The probes are precalibrated and as a
result are all interchangeable. Several different versions are available
for your specific R.H. needs.

HI 70604/5

R.H. probe with 5 m (16.5') cable

HI 70606/2

R.H. probe with sintered protective cap and 2 m
(7') cable

HI 70606/5

R.H. probe with sintered cap and 5 m (16.5') cable

TEMPERATURE PROBES

These probes use highly sensitive thermistor sensors which provide
greater accuracy, faster response and a temperature range that is
superior to conventional probes.
All Hanna temperature probes are supplied precalibrated from the
factory and are ready to be used with your meter. The probes are
easily connected to your meter with a standard connector.
Completely interchangeable, these probes make it possible for you to
switch from one to another without wasting time and money going
through time-consuming and tedious calibration procedures.
They are available with different handle colors to avoid cross contami-
nation during testing:

HI 762A

Air 

probe, with 1 m (3.3') cable and white handle

HI 762A/10

Air 

probe, with 10 m (33') cable and white handle

HI 762BL

General purpose 

liquid

 probe, with 1 m (3.3') cable

and black handle

HI 762BL/10

General purpose 

liquid

 probe, with 10 m (33')

cable and black handle

HI 762L

General purpose 

liquid

 probe, with 1 m (3.3') cable

and white handle

HI 762L/10

General purpose 

liquid

 probe, with 10 m (33')

cable and white handle

HI 762PBL

Penetration

 probe with 1 m (3.3') cable and 

blue

handle

HI 762PBL/10 Penetration

 probe with 10 m (33') cable and 

blue

handle

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIES

Summary of Contents for HI 9261






















Reviews: