13
12
When the correct year is selected, press the RANGE key once and the
month will start blinking.
Select the correct month by pressing the UP or DOWN keys.
Press RANGE and the day will start blinking.
Use the UP or DOWN keys to select the correct day. The day will still
be blinking.
Press the INTV and the RANGE keys simultaneously. The display will
show the time/printing interval setting. The printing interval on the
secondary LCD will be blinking.
Any interval can be selected from 1, 2, 5, 10, 15, 30, 60, 120 and
180 minutes by using the UP and DOWN keys.
Once the desired interval is selected, press RANGE once to memorize it.
The hour will start blinking.
RANGE
UP
DOWN
RANGE
UP
DOWN
INTV
RANGE
+
TIME
INTV
UP
DOWN
RANGE
If neither a temperature probe nor a calibra-
tion test plug is connected, the meter will
display on the primary display and print
"----" to alert the user. This could also indicate
that the probe cable is damaged.
Hanna offers a wide range of temperature probes to meet all
temperature measurement requirements. Hanna probes use highly
sensitive thermistor sensors which provide greater accuracy and faster
response than conventional thermistor probes.
Hanna temperature probes are supplied pre-calibrated from the
factory and are ready to use.
Available in four different handle colors to avoid cross contamination
during testing, these completely interchangeable probes make it
possible to switch from one to another without needing to recalibrate
the meter (see pages 34-35 for a complete listing).
In order to keep accurate records of temperature, your monitoring
equipment must be properly re-calibrated. Hanna Calibration Test
Plugs provide a quick and easy way to test the meter's accuracy. If
the reading differs by more than ±0.4°C (±0.8°F) from the Test
Plug value, the unit is due for re-calibration and you should contact
your Dealer or the nearest Hanna Customer Service Center.
See page 36 to choose the right Test Plug to suit your needs.
TO SET DATE, TIME, PRINTING INTERVAL
HI 9161 & HI 9261
When the instrument is turned on, the display
will show the TIME.
Press the INTV and the RANGE keys simultaneously. The display will
then show the date previously memorized with the year blinking
(shown as the last 2 digits of the year, e.g. 95=1995).
Use the UP and DOWN keys to select the year.
TIME
INTV
INTV
RANGE
+
DATE
UP
DOWN
