Hanna Instruments HI 8001, Instruction Manual

Page: 39 / 88

39
SET key or via panel S 59 (SET LOG LEVELS). The UP and DOWN arrow keys
are available to move between log records in a “select previous/next” manner.
This panel displays the following information:
Log record
Log record description.
Time stamp
Time stamp of logged occurrence.
Log record number
Log consulting level
System clock
5.6 GENERAL SETTINGS
The Setting panels provide an interface by which the user can set up the func-
tionality of the Fertigation Controller to suite the application requirements. The
parameters in any setting panel can be modified only if the user presses the SET
key (entering the setting mode). Once pressing the SET key the cursor (focus) is
passed to the first adjustable parameter on the panel. Using the keypad along
with the arrow keys the user can set the desired parameters and navigate within
the panel. The ENTER key validates all entries. In SET MODE panel the brows-
ing methods are disabled until the user exits from SET MODE by pressing the
ENTER (validation) or ESC (cancel) key.
To change program number you must go to panel
C 03 and then continue.
5.6.1 SET DATE & TIME – S 30
Date: Fri-22-09-2000
Time: 17:03:20
17:03
SET DATE & TIME S30
This panel allows the setting of the following parameters:
Date
Day / Month / Year format. The day is automatically updated once the
numeric date is entered and confirmed.
Time
Hour / Minute / Seconds format. The time is automatically updated once
the numeric time is entered.
System clock