Hanna Instruments HI 8001, Instruction Manual

Page: 20 / 88

20
4.2 PANEL BROWSING METHODS
In consulting mode, two browsing methods are available to view each of the 62
panels (screens) of the Fertigation Controller.
- Step-by-step browsing: pressing the PAGE UP and PAGE DOWN keys
allow consecutive navigation from one panel to the next. The direction is
dependent upon which key is selected.
- Direct access browsing : the number of the desired panel can be entered
directly using the panel number located on the bottom right corner of every
panel, prefixed by a
C or S . The panel number object is the initially focused
object on each screen. After entering the value by using the keypad and
ARROW KEYS , press the ENTER key to view the selected panel.
NOTE: If a panel is selected and the SET key is pressed entering the setting
mode, both browsing methods are disabled.
4.3 PANEL LIST
PANEL TABLE
CONSULTING PANELS SETTING PANELS
01 GENERAL INFO 30 SET DATE & TIME
02 SENSORS STATE 31 ACTIVE TIMETABLE
03 PROGRAM STATE 32 WORKDAY
04 PH STATE 33 SET PRIORITY
05 EC STATE 34 START CONDITION
06 SOLAR RAD IRRIG 35 SET START TIME
07 - 36 PROGRAM REPEATS
08 WORK TIME COND 37 PRE / POST IRRIG
09 PRIOR & CONFLICTS 38 SET SECTORS
10 IRRIG STATE 39 SET FERTILIZERS