Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 20 of 37
Firmware
1.0.0.29 Last Updated 8/2010
7.2
Configuring Unicorn 600x With Web Browser
Unicorn 600x has an embedded Web server that will respond to HTTP GET/POST
requests. It also has embedded HTML pages that allow users to configure the Unicorn
600x through a Web browser such as Microsoft’s IE and AOL’s Netscape.
The GUI interface can be download at bellow:
http://www.hanlongtek.com/books/6008_gui.rar
This gui include bellow pages:
1. SCREENSHOT OF DEVICE STATUS PAGE
2. SCREENSHOT OF BASIC OPTIONS PAGE
3. SCREENSHOT OF SUPPER OPTIONS PAGE
4. SCREENSHOT OF PROFILE
1 PAGE
5. SCREENSHOT OF PROFILE 2 PAGE
6. SCREENSHOT OF FXS PORTS PAGE
7.2.1 Access The Web Configuration Menu
The Unicorn 600x HTML configuration menu can be accessed via LAN or WAN port:
From the LAN port:
1. Directly connect a computer to the LAN port.
2. Open a command window on the computer
3. Type in “ipconfig /release”, the IP address etc. becomes 0.
4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.22.x segment by
default
5. Open a web browser, type in the default gateway IP address. http://192.168.22.1.
You will see the login page of the device.
From the WAN port:
The WAN port HTML configuration option is disabled by default from factory. To access
the HTML configuration menu from the WAN port:
1. Enable the “WAN Port Web Access” option via IVR option 12.
2. Find the WAN IP address of the Unicorn 600x using voice prompt menu option 02.
3. Access the Unicorn 600x Web Configuration page by the following URI via WAN port:
http:// Unicorn 600x -IP-Address (the Unicorn 600x IP-Address is the WAN IP address for
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004