Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 19 of 37
Firmware
1.0.0.29 Last Updated 8/2010
7 CONFIGURATION GUIDE
7.1
Configuring Unicorn 600x Via Voice Prompt
DHCP MODE
Select voice menu option 01 to enable Unicorn 600x to use DHCP.
STATIC IP MODE
Select voice menu option 01 to enable Unicorn 600x to use STATIC IP mode, then use
option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server
respectively.
FIRMWARE SERVER IP ADDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
CONFIGURATION SERVER IP ADDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
UPGRADE PROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User
can choose between TFTP and HTTP.
FIRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode among the following three
options:
1) always check,
2) check when pre/suffix changes, and
3) never upgrade
WAN PORT WEB ACCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration
pages.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004
