Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 35 of 37
Firmware
1.0.0.29 Last Updated 8/2010
blank, Hunting Group set to "4"
FXS Port #7: SIP UserID and Authenticate ID
entered, Hunting group set to "Active"
FXS Port #8: SIP UserID and Authenticate ID left
blank, Hunting Group set to "7"
Hunt Group 1 contains ports 1, 2, 3. Hunt Group 4
contains ports 4, 5, 6. Hunt Group 7 contains ports 7,
8.
Off hook Auto-dial
This field default is blank. If set a number, it is mean
that according port will auto outgo the setting number
when this port off hook.
7.6
Saving The Configuration Changes
Once a change is made, press the “Update” button in the Configuration Menu. The
following screen will confirm that the changes have been saved. To activate changes,
reboot or power cycle the Unicorn 600x after changes are made.
7.7
Screen-Shot Of Save Configuration Page
7.8
Rebooting From Remote
The administrator can remotely reboot the unit by pressing the “Reboot” button at the
bottom of the configuration menu. The user can re-login to the unit after waiting for about
30 seconds.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004
