Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 32 of 37
Firmware
1.0.0.29 Last Updated 8/2010
011[2-9]x. - allows international calls starting with 011
[3469]11 - allow dialing special and emergency numbers
311, 411, 611 and 911
Note: In some cases user wishes to dial strings such as
*123 to activate voice mail or other application provided by
service provider. In this case * should be predefined
inside dial plan feature and the Dial Plan should be: { [x*]+ }.
More information can be availabled at
Dail Plan Notes.
Subscribe for MWI
Default is No. When set to “Yes” a SUBSCRIBE for
Message Waiting Indication will be sent periodically.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in
outgoing INVITE message will be set to anonymous,
essentially blocking the Caller ID from displaying.
Anonymous Call
Rejection
Default is
No
. If set to Yes, incoming calls with anonymous
Caller ID will be rejected with 486 Busy message.
Check SIP User ID for
incoming INVITE
Check the SIP User ID in Request URI. If they don’t match,
the call will be rejected.
Session Expiration
The session timer extension enables SIP sessions to be
periodically “refreshed” via a re-INVITE request.
Once the session interval expires, if there is no refresh via a
re-INVITE message, the session will be terminated.
Session Expiration is the time (in seconds) at which the
session is considered timed out, if no successful session
refresh transaction occurs beforehand. The default value is
180 seconds. Default is 180 seconds.
Min-SE
The minimum session expiration (in seconds). Default is
90
seconds.
Caller Request Timer
If selecting “
Yes
” the device will use session timer when it
makes outbound calls if remote party supports session
timer.
Default is
NO.
Callee Request Timer
If selecting “
Yes
” the phone will use session timer when it
receives inbound calls with session timer request.
Default is
NO
.
Force Timer
If selecting “
Yes
” the device will use session timer even if
the remote party does not support this feature. Selecting
“
No
” will allow the device to enable session timer only when
the remote party support this feature.
To turn off Session Timer, select “
No
” for Caller Request
Timer, Callee Request Timer, and Force Timer.
Default is
NO
.
UAC Specify Refresher
As a Caller, select UAC to use the device as the refresher,
or UAS to use the Callee or proxy server as the refresher.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004