Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 25 of 37
Firmware
1.0.0.29 Last Updated 8/2010
port
command from other computers, but it also is vulnerable
to the DOS attack. Default is
No
.
Wan Side Http Access
If this parameter is set to “No”, the HTML configuration
update via WAN port is disabled.
7.5
Super User Configuration
Log-in to the Super User Configuration Page the same way as for the basic configuration
page. Log-in using either of the following passwords: “admin” or “1234”.
Screenshot Of Super User Configuration Login Screen
Super User configuration includes the end user configuration and Super configurations
including: SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration.
7.5.1 Super Configuration Page Definitions
Super Options
Setting options
Definitions
Admin Password
This contains the password to access the Advanced
Web Configuration page. This field is case sensitive.
Only the administrator can configure the “Advanced
Settings” page. Password field is purposely left blank for
security reasons after clicking update and saved. The
maximum password length is 26 characters,only digit or
letter.
Home NPA
Local area code for North American Dial Plan.
Layer3 Qos
This field defines the layer 3 QoS parameter which can
be the value used for IP Precedence or Diff-Serv or
MPLS. Default value is 48.
Layer2 Qos
Value used for layer 2 VLAN tag. Default setting is blank
Data VLAN Tag
When using Bridge Mode, Data VLAN Tag is supported.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004
