3.
Installation
3.3
Connect power
3.4
Opening/ Closing the lid
· Connect the device to voltage sources which correspond to the electrical requirements on
When closing the lid, close it completely until it clicks.
(O)
(X)
· Use sockets with a protective earth conductor and provided power cord.
the label attached to the device.
1. Connect the power cable to the power socket on the right side of the product and plug the cord
into the outlet.
2. Switch the centrifuge on using the power switch on the right side of the device.
▶
It is normal product to hear a beep when power is connected.
the lid-
1. Press the 'lid open' switch.
-Opening
-Closing the lid-
1. Put the lid on and press the edge of the lid
I
f the lid is not completely closed, the device will not operate.
