Hangar 9 ULTRA aspire, Instruction Manual

Page: 3 / 40

3
Introduction
The Aspire has been designed to build quickly and easily, providing you with great looks and exceptional flying performance.
Entering the world of sailplanes is both extremely challenging and rewarding. It’s your skill and knowledge of the surrounding atmos-
phere combined with the design capabilities of your model that will result in your ability to defy the laws of gravity and produce
flights of unbelievable distance or duration. Under the proper conditions, it’s not unusual for flight times of up to an hour or more to
be obtained, limited only by the capacity of the receiver and transmitter batteries or your endurance.
Warning:
An R/C aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas, preferably
AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your radio.
Pre-Assembly:
We strongly suggest that before you begin assembly of the kit, you read through this Instruction Manual so you can become familiar
with the parts and assembly sequence. Please assemble the kit according to the sequence provided in this Instruction Manual. Do
not attempt to modify or change the kit design as doing so could adversely affect the flying characteristics.
Seek Expert Assistance:
If you are new to R/C we suggest you find an experience pilot to check out your aircraft and help you with the first few flights. This
will help prevent damage to your model and will speed up the learning process. You can contact local R/C clubs or your hobby shop
to obtain the names of experienced R/C pilots who would be willing to help you with your first few flights.
Special Note:
Due to changes in weather, wrinkling of the covering can occur. This is the nature of the covering film of the model and can be easily
eliminated using a heat gun or sealing iron.
In Case of Wrinkle:
Carefully use a heat gun or sealing iron on the wrinkled area. Then rub the surface with a soft cloth until the surface is smooth again.
If you have any questions concerning the construction of the Aspire, please feel free to contact our Service Department at
the address below:
Horizon Hobby Distributors
4105 Fieldstone Road
Champaign, IL 61822
217-355-9511
Visit our web site at www.horizonhobby.com
Thank you again for purchasing the Hangar 9 Aspire sailplane. We believe you will have many enjoyable hours of challenging and
rewarding flight.