15
Hangar 9 Jackal 50 ARF
16. Break in the hinges by working the rudder right
and left a number of times.
17. Slide a silicone clevis keeper over a nylon clevis.
Thread the clevis on the rudder pushrod. With the rudder
servo centered, check that when the clevis is attached to the
torque rod horn that the rudder is centered. Once complete,
slide the silicone keeper over the forks of the clevis to
prevent it from opening accidentally.
Stabilizer Assembly Installation
Required Parts
Fuselage
#4 washer (3)
#4 lock washer (3)
Stabilizer/elevator assembly
24-inch (610mm) servo extension
4-40 x 1-inch socket head machine screw (3)
Required Tools and Adhesives
String
Hex wrench or ball driver: 3/32-inch
1. Locate the hardware to attach the stabilizer assembly
to the fuselage. You will also need the fuselage and stabilizer
assembly at this time.
2. Use string or a commercially available connector to
secure the 24-inch (610mm) servo extension to the elevator
servo lead.
3. Pass the extension through the fuselage toward
the receiver.
4. Slide a lock washer then a standard washer on the
4-40 x 1-inch socket head machine screw. Prepare all three
screws at this time.
