14
o
Step 12
Use the string to pull the servo extension through the
wing, exiting the opening uncovered in the previous step.
o
Step 13
Position the servo hatch in the wing and secure it
using four 2mm x 12mm self-tapping screws and a
#1 Phillips screwdriver.
o
Step 14
Attach the clevis from the 6-inch (152mm) pushrod to the
inside hole of the aileron control horn. A piece of safety
tubing has been installed on the clevis. This will be placed
over the clevis once the control throws are set.
o
Step 15
With the servo and aileron centered, mark the pushrod
where it crosses the outer hole of the servo arm using a
felt-tipped pen.
Summary of Contents for fokker D.VII
Page 53: ...53 Building and Flying Notes ...