21
Step 7
Slide the wing tube for the bottom wing into position in
the fuselage.
o
Step 8
Slide the bottom wing panel onto the wing tube.
Note
: Make sure the wing N-struts will not
come in contact with the bottom wing during
its installation, damaging the covering.
o
Step 9
Secure the bottom wing to the fuselage using a 4-40
x 1/2-inch socket head screw and #4 washer. Use a
3/32-inch ball driver to tighten the screw.
o
Step 10
Slide the wires from the N-strut into the tabs of the bottom
wing. Use two 1/16-inch (1.5mm) wheel collars and two
3mm x 5mm socket head screws to secure the struts in
position. You will need to use a 2.5mm ball driver to
tighten the screws.
Important
: Make sure to use
threadlock on the screws to prevent
them from vibrating loose.
Step 11
Repeat Steps 8 through 10 to attach the remaining bottom
wing panel.
Summary of Contents for fokker D.VII
Page 53: ...53 Building and Flying Notes ...
