H&S HDNR 7+4, Operator'S Manual / Parts Book

Page: 8 / 60

-6-
This is the safety-alert symbol. When you see this
symbol on your machine or in this manual, be alert to
the potential for personal injury.
Follow recommended precautions and safe
operating practices.
UNDERSTAND SIGNAL WORDS
A si gnal word - DANGER, WARNING, or CAUTION is
used with the safety alert symbol. DANGER identifies
the most serious hazards.
Safety signs with signal word DANGER or
WARNING are typically near specific hazards.
General precautions are listed on CAUTION safety
signs.
CAUTION
WARNING
CAUTION
SAFETY INFORMATION
OBSERVE MAXIMUM TRANSPORT SPEED
The maximum transport speed for this implement is 32 km/h (20 m.p.h.).
Some tractors are capable of operating at speeds that exceed the maximum
transport speed of this implement. Regardless of the maximum speed capability
of the tractor being used to tow this implement, do not exceed the implement’s
maximum transport speed.
Exceeding the implements maximum transport speed can result in:
* Loss of control of the tractor/implement combinatio
* Reduced or no ability to stop during brakin
* Implement tire failur
* Damage to the implement structure or its component
Use additional caution and reduce speed when towing under adverse surface
conditions, when turning, and when on inclines.
Do not attempt transport if the fully loaded implement weighs more than 1.5 times
the weight of the tractor.
Keep signs in good condition. Immediately replace any missing or damaged signs.
RECOGNIZE SAFETY INFORMATION
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this
manual, and all safety signs on your
machine. Follow all recommended
precautions and safe operating procedures.