H&S 2957, Operator'S Manual

Page: 7 / 50

-
1.6
-
The serial number plate is located on the back end of the Bale Processor, just
above the manual canister, on the left side of the processor (viewed from the
back).
IMPORTANT: For fast, correct service when ordering parts, supply your local
H&S dealer with:
1) The model number
2) The serial number
This information is essential when ordering parts for your H&S Bale Processor.
SERIAL NUMBER LOCATION
Always give your dealer the serial number of your H&S Bale Processor when ordering
parts or requesting service or other information.
The serial number plate is located where indicated. Please record the number in the
space below for easy reference.
MODEL NUMBER _____________________
SERIAL NUMBER _____________________