16
MINIVATOR SIM INSTALLATION MANUAL
Figure 47
Figure 46
Electrical connections / chassis covers
Fit the front chassis covers
Items required:
Tools required:
• Top front chassis cover
• Side cutters
• Bottom front chassis cover
1
Clip in the bottom front cover and fit the panel
fixing push studs.
2
Fit the top front cover and secure with the
supplied panel fixing push studs
(Figure 47)
.
Electrical connections
Items required:
Tools required:
• None
• None
1
Make seat and footplate electrical connections
(Figure 46)
.
a
Connect the key switch loom
(orange and green).
b
Connect the toggle loom
(white, blue and brown).
c
Connect the safety edge loom
(flat six way connection: 2 x brown,
2 x red and 2 x violet).
d
Connect the six way footplate loom.
POWERED FOOTPLATE ONLY
e
Connect the powered footplate looms
(twin yellow and grey comms).
POWER SWIVEL ONLY
f
Connect the grey powered swivel loom.
g
Connect the shielded swivel loom earth
ring terminal.
2
Test the function of the powered features,
including the toggle
(see pages 22/23)
.
05029 Sim Install MULTI ENG:Layout 1 17/06/2010 14:47 Page 16
