NEEDLE BAR HEIGHT
23
1
. To check your needle bar height
turn the hand wheel towards you to
bring the needle to it’s lowest
position. When the needle bar is in it’s
lowest position you can see that there
are two hairlines on the left side of
the needle bar. The upper hairline
should be flush with the bushing.
2.
If it is not correct locate
the needle bar driver on the
needle bar and with a 2.5
hex driver loosen the set
screw.
(Hold the needle bar
to provide resistance against
the adjustment when you
loosen the screw)
. Move the
needle bar into the correct
position. Be sure not to
rotate the needle bar. Re-
tighten the needle bar driver
set screw.
