background image

 

8

3. REMOTE CONTROL 

 

 

 
 

 
 

 
 

 
 

 

7. CURSOR

 

 

Press the buttons moving UP

DOWN

LEFT

RIGHT 

in the Unit/Disc’s function Menu. 

For Photo CD, press Right/Left Cursor to rotate the 
photo.

 

 

 

8.RETURN 

RETURN to previous page 
Return to previous page of the unit/disc function menu or 

Exit. 
Return to Menu when PBC is on during VCD playback. 

 

9.PREVIOUS 

Skip to the previous chapter/track 

 

10. REPEAT A-B 

Repeat playing back a selected section A->B 

A-> Start   
Press the button at the beginning of the desired section 

B-> End 
Press the button at the end of the desired section,B 

Cancel the setting 
Press the button again to switch off the setting,back to 

normal play 
To clear the menu bar display,press DISPLAY button. 
 

11. REV

 

Repeat pressing the SEARCH button on the remote or 
turning the SEARCH switch on the unit to change the 

SEARCH speed. 
Press 

button to resume normal PLAY. 

(This function is not applicable for XviD/MEPG4 discs.) 
 

12.REPEAT 

Repeat playing a selected CHAPTER/TITLE of DVD 
disc, or TRACK/DISC of other disc types. 
 

DVD Mode 
Repeat pressing the button to select REPEAT mode, 

CHATPER / TITLE; 
 

Other disc types mode 
Repeat pressing the button to select REPEAT mode, 
TRACK / DISC; 

 

13.SLOW REV 

SLOW REV (1/2X

1/4X

1/8X) 

Repeat pressing the button to change the SLOW motion 
speeds and press PLAY button back to normal PLAY 

mode. 

 

14.INFO 

Go to configuration page 

 

15.TITLE 

Go to DVD title menu(DVD only) 
 

1. POWER 

Press this switch to turn on/off this unit or set this unit in standby 
mode. 

 

2. ALPHANUMERIC 

KEYS 

PROGRAM NUMBER ACCESS.   

Select the item or settings 
 

3. CLEAR 

Clear the entries while entering the URL. 
 

4. TV 

MODE 

VIDEO SYSTEM AND OUTPUT SELECTION 
(NTSC/PAL; S-VIDEO.YPBPR/RGB 
 

5. SETUP 

Go to setup/configuration page 
 

6. PBC(VIEW 

DISPLAY) 

PLAYBACK CONTROL(Karaoke VCD only) 
Simply press PBC button to turn it on, the PBC menu will appear 

on the TV screen.Press the Numeric keys and then ENTER 
button to choose the Disc track you wish to play. 

 

VIEW DISPLAY: ON SCREEN DISPLAY 
Cureent status is shown such as 

Title,Chapter,Time,Audio,Subtitle,Angle.etc. 

 

 

9

           

 

16.EDIT/PROGRAM(URL) 

Programming the play list files. (direct Webpage access)

 

 

17.ANGLE/ROTATE 

VIEW ANGLE 

Repeat pressing the button to select different VIEW ANGLES 
available from DVD disc. 

TO ROTATE THE PHOTO WHEN PLAYBACK JPEG FILES. 
Press Forward/Rewind to turn directions. 
 

18.SHUFFLE 

Random playback of ISO/data CD 
 

19.OPEN/CLOSE 

Open/close the disc tray 
 

20.SELECT 

Browser — It acts as Num Lock on the Keyboard while entering 
the URL. 

 

21. 

Press “ Vol + “ to turn on the audio volume. 

 

22.MUTE 

TURN OFF THE VOLUME 

Stops the output of the AUDIO signal during playback. 
 

23.VOLUME – 

Press “VOL – “ to turn down the audio volume. 

 

24.ENTER 

CONFIRM AN ENTRY 
Confirm a setting entry in the Unit/Disc’s function menu. 

 

25.MENU 

DISC MAIN MENU 

Stop the unit, back to the disc Menu or beginning of disc. 
 

26.PLAY 

PLAY--  NORMAL 
 

27.NEXT 

Skip to the next chapter / track 
 

28.STOP / PRE-STOP(ONLY FOR DVD PLAYBACK

Press

 

 

once to stop the unit, memorizing the stopping position. 

Press

 

 to continue playing from the position that it stopped.         

Press 

 

again to completely STOP the unit. 

 

29.FORWARD 

FORWARD: 8X for MP3/CD/VCD/and 8X,16X,32X,48X for DVD 
Repeat pressing the SEARCH button on the remote or turning the 
SEARCH switch on the unit to change the SEARCH speed. 
Press 

 button to resume normal PLAY. 

(This function is not applicable for XviD or MEPG4 discs).

 

 

 

30.PAUSE / STEP (The unit will mute when PAUSE) 

Pause the unit from playing temporarily 

Press the button continuously to play forward frame by frame. 
Press 

 button to resume normal PLAY. 

 

31.SLOW FWD 

SLOW FORWARD(1/2X,1/4X,1/8X) 

Repeat pressing the button to change the SLOW motion speeds 
and press PLAY button back to normal play mode. 
 

32.SUBTITLE 

SUBTITLE LANGUAGE 
To change the subtitle languages available from DVD disc. 

 

33.AUDIO 

DVD AUDIO TRACK 

Repeat pressing the button to select up to 8 dialogues available 
from DVD disc. 

Repeat pressing the button to select STEREO, LEFT and RIGHT 
channels on VCD disc. 

NOTE: This function does not support other disc types. 

 

34.SEARCH 

GO TO SEARCH 

> DVD MODE 

Pressing the CURSOR and Numeric buttons to select search 

mode, Title, Chapter and Time modes. Press ENTER to confirm. 

> MPEG4 mode and VCD(PBC is OFF)mode

 

Pressing the CURSOR and Numeric buttons to select search 

mode, Title, Chapter and Time modes. Press ENTER to confirm 
The unit starts playing at the sectioned setting. 

Not applicable in MP3/CD/Photo playback. 
 

35.ZOOM 

ZOOM PICTURE 
 
VCD & DVD mode – press ZOOM to enlarge the picture and 

position of zooming. 
MPEG4 & Picture CD – press to adjust the size and position of 

zooming 

 
Special Function buttons used on the WEB 

 

A-B  

Go back to the Home Page. 

 

REPEAT 

Go back to the PLAYER USER PAGE while browsing the WEB or 

computer files. 

 

INFO 

The information of the current website status will be shown. 

 

URL 

Open the URL bar allows to entering the website or hyper link. 

 

SHUFFLE 

Go back to the previous page on the WEB. 
 

 

 

Summary of Contents for DNX-8620























Reviews: