Image Kiosk 8560/8570 User’s Guide
Rev B
3/1/07
5 - 1
5
Wireless LAN with 802.11b
Overview
The IK8560CE, IK8560CEUE, IK8570E, and IK8570EUE have on-board 2.4 GHz 802.11b WLAN (Wireless Local Area Network)
radios that uses Direct Sequence Spread Spectrum (DSSS) technology. The signal is spread continuously over a wide frequency
band at a data rate of up to 11 Mbps. The radio is interoperable with other 802.11b Wi-Fi-compliant products including Access
Points (APs), PCs via PC card adapters and other wireless portable devices.
Configuring the 802.11b Radio
The IK8560CE, IK8560CEUE, IK8570E, and IK8570EUE contain the AEGIS Client
®
, a comprehensive IEEE 802.1x tool to set
up the on-board 802.11b radio. The Client is a standards-based implementation of IEEE 802.1x and can be configured to work
with almost any network equipment–wired or wireless–that supports the 802.1x authentication standard. The Client is
interoperable with 802.1x-capable wireless APs and authentication servers including Microsoft's IAS and Cisco's ACS.
The Client uses public key authentication and encryption between Wireless APs (WAP) and roaming stations to exchange
dynamic Wired Equivalent Privacy (WEP) keys. In addition, network managers can control 802.1x user profiles from a centralized
RADIUS server or, in the case of TTLS, from a RADIUS Diameter or other AAA servers. The Client supports both wireless and
ethernet interfaces.
Supported Protocols
Authentication
The Client supports the following authentication methods according to the 802.1x protocols:
• MD5
• EAP TLS
• EAP TTLS
• Cisco LEAP and PEAP
• Microsoft PEAP
Encryption
The Client supports the following encryptions methods:
• WEP (64-bit and 128-bit)
• TKIP
The Client can also configure the 802.11b without authentication or encryption; see
Associating With Open APs
on page
5-14.
Required Network Configuration Information
Because the Client accesses a network that is protected by the IEEE 802.1x protocol, you must configure EAP data
communication to match your network server parameters. If the EAP configuration doesn’t match your network configuration, you
can’t access the network. Therefore, make sure you have the correct network server parameters on hand when you configure
the client.
Opening the Client
Double tap the icon in the command bar.
Summary of Contents for IK8560
