Image Kiosk 8560/8570 User’s Guide
Rev B
3/1/07
6 - 7
Enabling the Aimer
The 5100SR/SF engine contains a green aiming beam that is enabled by default in the Scan Demo. To enable the aiming beam,
tap
Setup
>
Enable
Aimer
. A checkmark appears on the menu to indicate that the aiming beam is enabled.
To see the aiming beam, see
Omni-Directional Aiming
on page
6-2.
Auto-Send
Auto-send allows you to send decoded information over a TCP/IP connection–both wired and wireless–to a workstation.
1. Enter the TCP/IP parameters by tapping
Setup
>
Radio Frequency
.
2. Use the SIP to enter the
IP Address
of the receiving workstation.
3. Verify that the default
TCP Port
of 6000 is correct.
4. Tap
Close
to save.
5. Tap
Setup
>
Auto-Send
. The next bar code you decode will be sent over the TCP/IP connection.
Summary of Contents for IK8560
