![background image](http://html1.mh-extra.com/html/hand-held-products/dolphin-9500/dolphin-9500_software-upgrade-instructions_3514549003.webp)
Technical Bulletin
Page 3
Document #500014592 Rev A ECN 500000010885
3)
Establish an ActiveSync connection to copy the UPG file:
Copy the UPG file to
the IPSM folder on the Dolphin.
4)
Execute the UPG file:
Using File Explorer, navigate to the folder containing the .UPG
file. Execute the UPG file by ‘
single-tapping’
on the UPG file.
5)
Program and Storage Memory reconfiguration
The Windows Mobile 5.0 Operating System does not support the runtime allocation
of Storage and Program memory.
If the unit is configured such that there is not enough Storage and Program Memory to
complete the upgrade, a message box similar to the one shown below is displayed.
If the unit cannot complete the upgrade in this configuration, the Storage and Program
memory must be temporarily reconfigured for the upgrade to complete.
Once the Storage and Program Memory reconfiguration is complete, the Dolphin will
automatically launch the upgrade process and attempt to complete the upgrade.
6)
Version Info Dialog:
A Message box similar to the one shown below will be
displayed that shows the current and new revisions. Any of the three upgradeable
components that are not being updated will be grayed out, and the new rev will display
as “No Update”. Tap the "Install" button one time. At this point, the system may
appear to be unresponsive for ten seconds or more while the upgrade file is
decompressed from the object store to main memory.