![background image](http://html1.mh-extra.com/html/hand-held-products/dolphin-9500-series/dolphin-9500-series_quick-start-manual_589752034.webp)
30
Dolphin® 9500 Series Quick Start Guide
This product is marked with
in accordance with the Class II product
requirements specified in the R&TTE Directive, 1999/5/EC. The equipment is intended for
use throughout the European Community.
PAN European Frequency Range: 2.402 - 2.480 GHz
Restrictions for use in France are as follows:
•
Indoor use - Maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz
•
Outdoor use - Maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and
maximum power (EIRP*) of 10 mW for the 2454-2483 MHz band.
Dolphin 9500 GSM R&TTE Compliance Statement
The Dolphin 9500 terminal is the only terminal that supports a GSM/GPRS radio.
The Dolphin RF is in conformity with all essential requirements of the R&TTE Directive
(1999/5/EC).
This equipment has been assessed to the following standards:
Pacemakers, Hearing Aids, and Other Electrically Powered Devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This
standard requires devices to operate properly in an EM Field with a strength of 3V/m over
a frequency range of 26 to 1000MHz.
The maximum allowable field strength emitted by the Dolphin is 0.3V/m according to
Subpart B of Part 1 of the FCC rules. Therefore, the Dolphin RF has no effect on medical
devices that meet the IEC specification.
Microwaves
The radio in the Dolphin RF terminal operates on the same frequency band as a
microwave oven. Therefore, if you use a microwave within range of the Dolphin RF
terminal you may notice performance degradation in your wireless network. However, both
your microwave and your wireless network will continue to function. The Dolphin Batch
terminal does not contain a radio, and therefore, is not affected by microwave ovens.
Care and Cleaning of the Dolphin 9500 Series
When needed, clean the image engine window and the LCD display with a clean, non-
abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth.
Parameter
Specification
R&TTE
EN 301 511: 2000
EN 301 489-1 (2002-08)
EN 301 489-7 (2002-08)
EN 60950:2000
EN 50361:2001
!
!!
0681