Dolphin® 9500 Series Quick Start Guide
5
Install the Main Battery Pack
Use only the Li-ion battery packs provided by Hand Held Products. The
use of any battery pack not sold/manufactured by Hand Held Products
in the Dolphin 9500 Series terminal will void your warranty and may
result in damage to the Dolphin terminal or battery.
1. Remove the Li-ion battery pack from its
package.
2. Hold the terminal with the front panel
(keyboard) facing down.
3. If necessary, detach the hand strap.
4. Take the battery and insert the end
without the locking tab into the top of the
battery well and push down with a hinging
motion until the locking tab snaps.
5. If necessary, re-attach the hand strap.
To remove the battery pack, detach the hand
strap, press the locking tab on the battery
pack away from the bottom panel, and pull
the battery pack up with a hinging motion.
Charge the Main and Backup Batteries
The power supply consists of two types of battery power:
1. The main battery pack installed in the back panel and
2. The backup battery located inside the terminal.
The main battery powers the terminal and charges the internal backup battery.
The internal backup battery maintains the data stored in RAM memory and the
keeps the system clock running for up to 30 minutes when the main battery is
completely discharged or removed.
Terminals are shipped with both batteries completely discharged. Charge the
main battery pack for a minimum of four hours before initial use in the
terminal!
For charging, use a Dolphin 9500 Series peripheral and the power
cables provided by Hand Held Products. Use of peripherals or cables
not sold/manufactured by Hand Held Products will void the warranty
and may damage the terminal.
!
!
