Hammond XK-3C, Owner'S Manual

Page: 81 / 126

Setting the Parameters
81
REVERB
In this mode, you can change the setting for the REVERB EFFECT.
To locate this mode:
1. Touch the [MENU/EXIT] button for the MENU display, select PAGE C by the [PAGE] button,
and then touch the [4] REVERB button.
2. Or, hold down the [REVERB] button for a while.
PRESET PARAMETERS
Reverb is a Preset Parameter, designed to be actively
used as one of the tone-making parameters.
However, it is not practical to use Reverb as a tonal
complementary tool to match the room/stage/hall. In
such a case, if you switch off the P.LOAD RV/EQ in the
Preset function mode, the Reverb On/Off value does
not change when the preset is recalled. (P. 58)
1. DEPTH
This sets the Depth (= Volume) of the Reverb Effect.
The setting range is 0 - 15. If you increase the value, it will give
the audience the impression that the player is performing in a
larger room.
2. TYPE
This sets the Types of Reverb Effect.
Room 1 Room 1 Room 1 Room 1 Room 1: Inside the room (short)
Room 2 Room 2 Room 2 Room 2 Room 2: Inside the room (long)
Live Live Live Live Live: Live house
Hall 1 Hall 1 Hall 1 Hall 1 Hall 1: Concert Hall (long)
Hall 2 Hall 2 Hall 2 Hall 2 Hall 2: Concert Hall (short)
Church Church Church Church Church: Church
Plate Plate Plate Plate Plate: Iron-plate Reverb
Delay Delay Delay Delay Delay: Delay
P P P P PanDly anDly anDly anDly anDly: Panning Delay
RevDly RevDly RevDly RevDly RevDly: Delay
3. REVERB TIME
When the Type (3) is set at Room 1 to Plate, it sets the Time for
Reverb to fade out.
The setting range is 0 - 31. The higher the value, the greater the
impression of a large building.
4. DELAY TIME
When the Type (3) is set at Delay, PanDly, RevDly, it sets the
delaying time.
The setting range is 4.7 - 2000 ms. The higher the number, the
longer the delay gets.
NOTE: You can set the delay time with the foot switch (P. 65).
5. DELAY FEEDBACK
When the Type (3) is at Delay, PanDly, RevDly, it sets the amount
of the Feedback. (The delaying sound repeats.)
The setting range is 0 - 96%. The higher the value, the more
Feedback you get.
6. LESLIE ON REVERB
This sets the route of the Reverb and Leslie Effect.
OF OF OF OF OF: Leslie to Reverb
ON ON ON ON ON: Reverb to Leslie
NOTE: These parameters are Preset Parameters and are recorded
to each Combination Preset.
3
1 2
3 5
6
4