Hammond XK-3C, Owner'S Manual

Page: 22 / 126

*#1 :-%
Owner’s Manual
22
You can record various settings to the Preset Keys mounted
on the left-hand side of the XK-3C. This is called “Combi-
nation Preset”.
The Combination Preset consists of the “BANK” and
“KEY” (2-dimensional) such as “C-D”, and appears for
each setting on the Display. The Preset data is recorded in the Banks C to B at the fac-
tory. Thus you can start playing immediately.
PLAY WITH THE COMBINATION PRESET
The chart on the left is for the Combination Preset. The “BANK”
is shown vertically (line) and the “KEY” horizontally (column).
Select one combination from this chart and play.
“C - B” is initially selected at the factory.
The example below recalls this.
1. Select the BANK
While holding down the [BANK] Button, press the Preset Key
[F].
NOTE: The LED for the Preset Key indicates the “BANK”,
while the [BANK] Button is pressed.
EX. Select “F - G”
HOW TO RECALL THE PRESET
2. Select the KEY
Press the Preset Key [G].
At this time the Preset is decided and the setting changes.
NOTE: While the [BANK] Button is released, the LED indi-
cates the “KEY”.
“F - G” appears on the bottom left of the Display.
Recall various Combination Presets and play.
When you recall a Combination Preset, not only Drawbars but
also the Effects such as Leslie and Reverb change altogether.
However, the BANK B of the factory setting changes only the
Drawbars. This action is the same as on B-3 or C-3.
NOTE: You can set the types of the Parameter you recall.
(P. 58)
NOTE: Some Combination Presets cause sound cut-off or
audio interruption, when they are selected while
pressing keys.
NOTE: The Preset Key “C” creates no sound (, if combined)
with any Bank in default. This is called “Cancel”.
Combination Presets
C C
<
D D
<
E F F
<
G G
<
A A
<
B
C
C
<
D
D
<
E
F
F
<
G
G
<
A
A
<
B
Ban
k
Key
Adj
ust
B
Light
Press and Hold
Light
Touch
Touch
1
2