background image

*#1 :-%

Owner’s Manual

42

COMBINATION PRESETS

The settings you have made can be recorded into the Combination Presets.

BANK AND KEY

The combination preset chart to the left, shows the [BANK] and
the [KEY], information.
Access is made by the Preset Keys. To select the [BANK], press
the key, holding down the [BANK] button. To select the [KEY],
just press the Preset Key.
Recording and recall is determined when the Key is designated.
Only designating the Bank does not switch the recording or re-
call.
Refer to the illustration on the left bottom for each Key and Name.

The [B] key on the right end is a special Preset, called “Adjust
Preset”. Here the Drawbar Registration on the panel always
matches the internal registration.

NOTE: The setting of the Preset Keys [C] to [A] on the B-3/C-3 is

fixed, and the [A

<

<

<

<

<

] and [B] are used to switch the Drawbar

Registration on the panel. However, on this model, you can
change the setting by moving the Drawbars, even while us-
ing the keys [C] to [A].

COMBINATION PRESETS

On the original B-3 organ the preset keys only stored drawbar reg-
istration information. On the XK-3C however in addition to drawbar
registration you can store many various parameters to a preset.
Thus the name “Combination Preset”.

NOTE: The parameters to be recalled by the Preset Keys can be

limited Bank by Bank. (P. 58)

Combination Presets

C

C

<

D

D

<

E

F

F

<

G

G

<

A

A

<

B

C

C

<

D

D

<

E
F

F

<

G

G

<

A

A

<

B

Ban

k

Key

Adj
ust

 B

Summary of Contents for XK-3C































































































































Reviews: