Hammond XK-3C, Owner'S Manual

Page: 62 / 126

*#1 :-%
Owner’s Manual
62
CONTROL
In this mode, you can control the setting relating to each
controller.
You may change the roles of several knobs and switches
mounted on this keyboard. Also, on the rear panel are two
jacks for connecting the Foot-switch and the Expression
Pedal. You must choose either of them in this mode. To locate this mode:
1. Touch the [MENU/EXIT] button and display the MENU and
select PAGE A by the [PAGE] button, and then touch the [4]
CONTROL button.
2. Or, you may touch the [CONTROL] button (in default).
 DRAWBAR
1. DRAWBAR - CONTROL MODE (G)
This is for setting how the right and left Drawbars function, when [A
<
] or [B] of the
Preset key is selected.
UPPER/L UPPER/L UPPER/L UPPER/L UPPER/LOWER OWER OWER OWER OWER:
The left Drawbar controls the UPPER and the right one the LOWER Part re-
spectively.
A A A A A
< < < < <
/B /B /B /B /B:
While [A
<
] is ON, the right Drawbar controls the UPPER Part and the left
Drawbar does not operate. Also, while [B] is ON, the right Drawbar does not
operate but the left Drawbar controls the UPPER Part. While [A
<
] or [B] is
ON, you can not operate the Drawbar Registration of the LOWER Part.
 PITCH BEND
2. BEND - L&U DOWN (P)
3. BEND - L&U UP (P)
4. BEND - PEDAL DOWN (P)
5. BEND - PEDAL UP (P)
These are for setting the changing range of the PITCH-BEND WHEEL by the semi-tone.
Both the LOWER and the UPPER Parts change at the same time, as they use the same
Tone-Wheels.
The setting range is 0 - 12 for up, 0 - 24 for down.
1
2 3 4 5 6 7 8
9
10 11 12
13
14 15 11
17 18 19
21
22 23
16