Hammond XK-3C, Owner'S Manual

Page: 36 / 126

*#1 :-%
Owner’s Manual
36
On this keyboard, there are 3 Parts: UPPER, LOWER and PEDAL, and each of them has the
corresponding Drawbars.
The manual on the keyboard is usually assigned to the UPPER position. If you want to play the
LOWER or PEDAL Part, use the Split or Manual Bass functions, or connect the MIDI keyboard
and assign each part.
There are lamps(= LED’s) in front of the two sets of 9 Drawbars, marked with “UPPER/ B” and
“LOWER/A
<
”. They indicate the assignment of the Drawbar Sets. They are assigned to UPPER
and LOWER when shipped from the factory.
A
< and B are used when you want to operate it like the Upper Manual of the B-3/C-3. In this
case, both Drawbar Sets correspond with the Preset Key A
<
and B, and control only the UPPER
Part. The LOWER Part is not controled. Please read the CONTROL Chapter for further details.
(P. 62 #1)
3 SETS OF DRAWBARS AND PARTS
MATCH THE REGISTRATION TO DRAWBARS
If you recall the Combination Preset, the Drawbar Registration is not physical but is replaced
with the recorded/memorized one. If you move any Drawbar at this stage, only the Footage
moved is reflected.
To match only the Registration to the Drawbars, while using the content of the Combination
Preset, keep depressing the Preset Key for a while. Combination Preset is recalled and then the
physical Drawbar Registration is reflected.
Touch and Hold