6
• Operate with care, and never operate the trimmer when you are tired, ill, or under the
influence of alcohol, drugs or medications.
• Only ever use this trimmer in daylight conditions or with good artificial light.
• Ensure the power switch is turned off before removing jammed materials.
• Carry the Hammersmith Bionic Trimmer by the handle, with the spinning head
stationary.
• Only switch on the motor once hands and feet are away from the cutting area.
• Always ensure that the ventilation holes are free from deposits.
• Before using the device, make sure that all parts are properly assembled.
• The appliance is only to be used for its intended purpose.
• Do not allow children or inexperienced users to operate the appliance.
• This appliance may be used by children above the age of 8 years, by persons of
reduced physical, sensory or mental capabilities or by persons with insufficient
experience or knowledge, provided they are supervised or have received instruction in
the safe use of the appliance and understand the associated risks.
• Extreme caution is advised when using the device near children and when leaving it
unattended. Do not allow children to play with the appliance.
• Always keep the handle dry, clean and free from oil and grease.
• Keep all bystanders, children and pets at least 15 metres away.
• Only use the supplied power adapter.
• Do not use the device near flammable liquids, gases, dust or other potentially
explosive environments.
• To avoid the risk of electric shock, avoid contact between the body and earthed
surfaces such as pipes, radiators, stoves and refrigerators.
• Never use the power cord to carry or unplug the appliance.
• Never expose the device to rain or moisture, in order to reduce the risk of electric
shock.
• This product is designed for light grass trimming. Please note that this device is not
intended for commercial or industrial use.
• Do not use the device if the power switch is defective.
• To prevent accidental device start-up, make sure that the device is disconnected from
the mains before making adjustments, or changing or storing accessories.
• The appliance can pose danger in the hands of untrained users. When not in use,
keep the device out of reach of children and do not allow it to be operated by persons
unfamiliar with its use (or these instructions).
• To avoid accidents, periodically check the device for alignment, spinning parts, parts
breakage, and any other conditions that could affect its operation.
• Keep the appliance clean. Use the device and accessories according to these
instructions. Using the unit for work for which it is not intended may result in injury.
• Retain all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR BATTERIES/BATTERY CHARGERS
• Protect the charger from rain and moisture to reduce the risk of electric shock.
• Only ever charge the battery using the supplied charger.
• The supplied charger is only to be used for charging the Hammersmith Bionic Trimmer.
To avoid the risk of fire and explosion, it must never be used to charge another device.
• Before each use, check the charger, cable and plug for any damage. If the charger is
damaged, cease use, and do not attempt to repair it.
• To avoid the risk of fire, do not use the charger on flammable surfaces (such as paper,
textiles, etc.) or in flammable environments.
• If the appliance is dropped or subjected to a severe impact, liquid may leak from the
battery. If this fluid accidentally comes into contact with your skin, rinse the area
immediately with water, as it may cause irritation and even burns. If the fluid comes in
contact with your eyes, seek medical advice immediately.
• Do not open the battery yourself, in order to avoid short circuits.
• To reduce the risk of explosion, protect the battery from heat, such as, for example,
continuous exposure to sunlight or fire.
• To avoid the risk of explosion, do not short-circuit the battery.
• If the battery is damaged by improper use, steam may escape from it. If this happens,
retreat to fresh air, and seek medical advice if breathing difficulties develop.
Always wear protective clothing, such as gloves, long trousers, long sleeves,
goggles and facial protection. Pay attention to people, pets and children.
Stop the device when people are in the vicinity, until they have cleared the
area. The appliance should be cleaned of dirt after each use. Use only in a dry
environment. Do not use on wet grass. Use only as instructed.
FIRST STEPS:
UNPACKING
This product requires assembly.
1. Carefully remove the product and accessories from the box. Make sure that all parts are included (see also
Delivery Contents).
2. Check the product carefully to make sure that it has not been broken or damaged during transit.
WARNING: If parts are damaged or missing, do not operate this product until such parts have
been replaced. Failure to follow this warning could result in serious injury.
ASSEMBLY
FITTING THE HANDLE WITH TELESCOPIC ROD (L)
The telescopic rod (L) is only designed for use with the Hammersmith Bionic Trimmer in close
proximity to the ground. Do not use the device for trimming hedges.
FIT/ADJUST THE TELESCOPIC ROD (L) (#2):
A. Loosen the twist lock (M) on the rod and pull out the telescopic rod until the desired length is reached. To
fix/lock the rod, hold it steady and tighten the twist lock.
B. You can only adjust the length of the telescopic rod (L) before attaching it to the device.
C. Insert the end of the telescopic rod into the safety lock (pay attention to the grooves on the telescopic
rod). Turn the safety lock clockwise until the bar is tight and secure.
Make sure that the telescopic rod
is FIXED in the safety lock - otherwise the device will not start as a safety precaution! (#3
)
D. To remove the telescopic rod (L), loosen the safety lock (D) and pull out the rod.
FITTING THE PROTECTIVE COVER (G) #4
1. Align the tabs on the shield with the notches on the main body. Click into place to secure. The protective
cover (G) can only be fitted in one direction.
2. Use the supplied screw (K) to secure the protective cover.
Tighten the screw (K) on the left side of
the device.
ATTACHING & REPLACING THE CABLE TIES (C) #5
Make sure that the device is switched off before installing or replacing the cable ties (C).
1. Insert the cable ties (C) through the cable tie holders (H) as shown. The lock of the cable ties should point
down and the locking teeth should point up (5a).
2. Thread the end of the cable ties (C) into the cable tie closures. Insert the pointed end through the hole of
the cable tie holder. Then thread into the clasp, tighten and lock securely (5b).
3. When replacing cable ties (C), cut off worn or damaged cable ties and replace them with new ones (5c).
TIP FOR EASIER THREADING OF THE CABLE TIES: To make threading the cable ties easier, bend the
cable ties by gently moving them back and forth with your fingertips. This makes it easier for them
to slide into the cable tie holder (5d).
Follow steps 1-3 to attach new cable ties.
Important information about using other cable ties:
You can use any commercially available cable ties up to a thickness of 4 mm and a length of 98 mm.
If you only have longer cable ties to hand, it is best to shorten them to the appropriate length of 98
mm after fitting.
Caution: If the cable ties are not shortened accordingly, they will come into contact with the
protective cover of the Hammersmith Bionic Trimmer when in use. This affects the functionality and
performance of the device.
CHARGING (#6)
IMPORTANT: Before charging, ensure that the device is turned off.
FOR FIRST USE: YOU MUST CHARGE THE DEVICE UNTIL THE CHARGE INDICATOR
LIGHTS UP GREEN. ALL SUBSEQUENT CHARGES REQUIRE A FULL 4 HOURS.
Charge the device using the adapter provided. The LED indicator light (F) changes from red to green as soon as
the battery is fully charged. It takes approximately 4 hours to fully charge the battery.
Charge level indicator: The LED indicator flashes RED when the battery is low. The device‘s battery may then
be empty in 3-8 minutes. Please fully charge the battery for optimal performance. The body of the device may
warm up during the charging process. This is normal.
IMPORTANT: YOU CAN USE YOUR HAMMERSMITH BIONIC TRIMMER FOR LAWN TRIMMING AND
TRIMMING LAWN EDGES.
IMPORTANT INFORMATION BEFORE USING:
•
IMPORTANT! Before each use, check for damaged/worn parts and that the cable ties (C) are
functioning correctly.
•
IMPORTANT! MAKE SURE YOU HAVE READ AND UNDERSTAND ALL WARNINGS BEFORE USING.
• The Hammersmith Bionic Trimmer must be fully charged. For charging instructions, refer to this instruction
manual. When the battery is empty, the trimmer switches off automatically to protect the lithium battery
from deep discharge.
• If necessary, extend the telescopic rod (L) to the required length. Instructions for this can be found in this
instruction manual.
• Always keep the device away from your body and maintain a reasonable distance between your body and
the device. Any contact with the trimmer‘s cable ties during operation could result in serious injury.
•
ONLY USE THE DEVICE FOR CUTTING LAWN EDGES AND SMALL GRASS AREAS IN PRIVATE
GARDENS AND YARDS.