Hammer N2-35 User Manual Download Page 12

Page: 12 / 60

Hall in Tirol, 1.1.2018

Bandsaw

N2-35

3 Declaration of Conformity

EG-Declaration of Conformity

According to Machine Guidelines 2006/42/EG

We hereby declare that the machine indicated below, which corresponds to the design and construction of the model

we placed on the market, conforms with the health and safety requirements as stated by the EC.

This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.

Modifying or altering the machine without the express written agreement of the manufacturer shall render the

warranty null and void.

The signatory of this statement is the appointed agent for

the compilation of the technical information.

Johann Felder, Managing Director FELDER KG

KR-FELDER-STR.1 • A-6060 Hall in Tirol

Manufacturer:

FELDER KG

KR-FELDER-STR.1

A-6060 Hall in Tirol

Product designation:

Bandsaw

Make:

Hammer

Model designation:

N2-35

The following EC guidelines were applied:

2006/42/EG

2014/30/EU

The following harmonised norms were applied:

EN 1807-1

Declaration of Conformity

Summary of Contents for N2-35





























































Search results

Summary of Contents for N2-35

Reviews:

Related manuals for N2-35

Brands by name

Popular brands

Hammer N2-35, User Manual

Search results

Summary of Contents for N2-35

Reviews:

Related manuals for N2-35

Brands by name

Popular brands