Hammer N2-35, User Manual

Page: 26 / 60

26
min. 4 mm
!
"
!
#
Bandsaw
N2-35
7.2.2 Attaching the band saw to the machine frame
Fig. 7-3: Assembly - Bandsaw
Warning! Heavy dead weights can easily cause an injury
To facilitate assembly, ensure the presence of a minimum of one additional people.
Assembly - Bandsaw:
1.
Do not screw in the fastening screws completely. The
distance between the bottom edge of the screw head
and the machine base should be at least 4 mm.
2.
Tighten the screws once the angularity is set. Move the
machine in the direction of the slots.
3 . Screw in the socket head cap screw with the
hex key (can be reached via the bore).
!
4 x Fixing screws
"
Slot
#
Bore
Note:
If the machine stand is not mounted on the machine frame, the machine must be placed on a stable and level
surface at least 390 mm high.
Setup and installation