29
MAINTENANCE (Con’t)
ONCE A DAY
1. Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
2. Visually inspect belts for wear at and around connections and along the entire length of the belt.
Always replace at first sign of wear.
ONCE A WEEK
1. Inspect all accessories, connecting links, and carabiner clips for wear.
2. Check condition of hand grips.
3. Check for belt stretch on PLBI and adjust as necessary by loosening the belt clamp on top of the
lower movement arm, then pulling loose end of belt to tighten. Tighten belt clamp down.
ONCE A MONTH
Visually inspect all hardware for loosening, tampering or wear.
NOTES
Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as neces-
sary.
MINIMIZE SCRATCHES
Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth. Rinse well with
clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots. Fresh paint
splashes, grease and smeared glazing compounds can be removed easily before drying by rubbing lightly
with isopropyl alcohol. Afterward, a warm final wash should be made, beginning with a mild soap or deter-
gent solution and ending with a thorough rinsing with clean water.
