HAMMELMANN B7.02502.0210, Operating Instructions Manual

Page: 306 / 311

Coolant VCS Ready Mixed 21485015
6. ACCIDENTAL RELEASE MEASURES
6.4 Reference to other
sections : See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
HANDLING AND STORAGE 7.
Keep container tightly closed in a cool, well- ventilated place. Do not store in unlabelled
containers.
7.1 Precautions for safe handling
Protective measures :
Wash hands, forearms and face thoroughly after handling chemical products, before eating,
smoking and using the lavatory and at the end of the working period. Wash contaminated clothing
before reusing. : Advice on general
occupational hygiene
: 7.2 Conditions for safe
storage, including any
incompatibilities
7.3 Specific end use(s)
Recommendations : Coolant and antifreeze.
Not available. : Industrial sector specific
solutions
Avoid contact with eyes, skin and clothing. Avoid exposure during pregnancy. Wash thoroughly
after handling. Avoid contact of spilt material and runoff with soil and surface waterways.
Ingredient name Occupational exposure limits
ethanediol
EU OEL (Europe, 4/2006). Absorbed through skin. Notes: Indicative
Limit value: 20 ppm 8 hour(s).
Limit value: 52 mg/m³ 8 hour(s).
Short term limit value: 40 ppm 15 minute(s).
Short term limit value: 104 mg/m³ 15 minute(s).
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Hand protection
In case of insufficient ventilation, wear suitable respiratory equipment.
For prolonged or repeated handling, use gloves : neoprene , nitrile , natural rubber (latex) , or
PVC .
Use safety eyewear designed to protect against splash of liquids. Eye protection
Respiratory protection
:
:
:
Environmental exposure
controls :
Do not allow to enter drains or watercourses.
Wash hands, forearms and face thoroughly after handling chemical products, before eating,
smoking and using the lavatory and at the end of the working period.
Personal protective equipment
8.1 Control parameters
Occupational exposure limits
Derived effect levels
Product/ingredient name Type Exposure
Value Population
Effects
ethane-1,2-diol DNEL Long term Dermal 106 mg/kg
bw/day Workers Systemic
DNEL Long term Inhalation 35 mg/m³ Workers Local
DNEL Long term Dermal 53 mg/kg
bw/day Man via the
environment Systemic
DNEL Long term Inhalation 7 mg/m³ Man via the
environment Local
Predicted effect concentrations
No PECs available.
8.2 Exposure controls
Appropriate engineering
controls
:
Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use
of local exhaust ventilation and good general extraction. If workers are exposed to concentrations
above the exposure limit, they must use appropriate, certified respirators.
Individual protection measures
Hygiene measures :
PHYSICAL AND CHEMICAL PROPERTIES
Physical state Liquid.
Not available.
Slight Odour
pH
Yellow. Colour
9.
Not available.
Not available. Odour threshold
:
:
:
:
:
Appearance
Melting point/freezing point :
9.1 Information on basic physical and chemical properties
Date of issue : 2012-01-26.
3/6