HAMMELMANN B7.02502.0210, Operating Instructions Manual

Page: 50 / 311

Operating instructions
Shut down
No.: HDP 502 / S 1100-50
Page 44, Issue: 03.2017

Copyright Hammelmann GmbH
Germany

D-59302 Oelde

Carl-Zeiss-Straße 6 - 8
 With the engine stopped almost fill the header tank with water via the suction connection.
 Unscrew the header tank cover and add the correct amount of anti-corrosion fluids.
 Remove the suction hose and close the suction connection with the screw cap.
 Fit a short length of H.P. hose to the pressure outlet and place the free end in the header tank.
 Run the pump AT IDLE SPEED for 2 or 3 minutes allowing the emulsion to circulate through the system.
 Observe the emulsion in the tank and if necessary add more Shell Donax C.
 Stop the pump.
 Remove hose from H.P. water connection. Clean, grease and cap the connection.