HAMMELMANN B7.02502.0210, Operating Instructions Manual

Page: 247 / 311

SIHI
SuperNova
Programme
Range: ZLND
Volute casing pump complying with EN 733 / DIN 24255
*
For local contact details:
www. sterlingfluidsystems.com In the search to improve continuously its products,
Sterling Fluid Systems reserves the right to modify its
products at any time without prior notice

(Sterling Fluid Systems BV) 2001
Operating instructions
Safety issues Chapter 1
Safety instructions and compliance
Intended application Chapter 2
Application, description
Planning the installation Chapter 3
Requirements, piping system, accessories
Unpacking, storage, transport Chapter 4
Supply, interim storage, corrosion protection
Installing the pump Chapter 5
Assembly at site, tools, checks
Start-up and shut-down Chapter 6
Important requirements
Maintenance, dismantling, assembly Chapter 7
Intervals, cleaning
Troubleshooting Chapter 8
If something does not work
Technical data Chapter 9
Dimensions, permissible values
Annex Chapter 10
Technical data, dimensions table, sectional drawings
*
With certain exceptions – see Technical Catalogue
Attention:
Both the pump and/or the pump set must be installed and commissioned by qualified technical
personnel only and these installation, commissioning and operating instructions must be strictly observed.
Failure to do so could result in:
•
danger to you and your colleagues,
•
the pump or the pump unit may be damaged ,
Note that the manufacturer is not liable for damages resulting from failure to observe these instructions.
Please be aware of your responsibility to your colleagues when working on the pump or the pump set!
Safety instructions marked with included in this Operating Instructions and in the
Supplementary Operating Instructions, which must be attached to this Operating Instruction, have to
be considered in particular when operating this pump in potentially explosive atmospheres!
HAMMELMANN Code no.: 04.03226.0769
Type 32-200