Hamilton Hopper HSH, Manual

Page: 5 / 28

Document #101-0240 5 04/22/2013
II. CAPACITY
Hamilton Mfg. Corp. produces several different styles of Hoppers to meet the varying demands of Hamilton
customers requirements. These Hoppers differ in holding capacity. The Hoppers are shown in the table below,
where it is assumed that quarters are being dispensed.
For all of these models, the Hopper reports that it is empty when the coins no longer cover the two sensing
plates in the bottom of the Hopper bowl. This usually occurs when there are approximately 70-125 quarter-sized
coins remaining. These numbers will vary depending on the actual coins remaining. These numbers will vary
depending on actual coin being dispensed. The HTK Smart Hopper also provides a low coin status. This status
occurs when only the long sensor is covered.
MODEL # QUARTERS $ QUARTERS CHANGER APPLICATION
HSH 4800 $1,200 Most Changers
HSH-A 3200 $800 Auto Cashiers
HSH-60Q 2400 $600 ER-60 Changers
HSH-XT-Q 8000 $2,000 2000V Changers
SMART 4800 $1,200 HTK ONLY