Hamilton Hopper HSH, Manual

Page: 4 / 28

Document #101-0240 4 04/22/2013
I. Introduction
The Hamilton Hopper was not only designed for large quantities of coins, it was also designed to withstand
the most rugged of environments. The hopper contains minimal moving parts for reduced wear, virtually zero
adjustments, and an all Lexan® and stainless steel construction to weather the harshest of environments. The
Hamilton Hopper comes in many different configurations for dispensing a variety of coins and metal tokens.
Among the possibilities are coins that range in size from the small U.S. dime to the large 1 1/8” token. Many
foreign coins will also work in the Hopper. It is important to specify what type of coin is to be dispensed when
ordering so the correct configuration will be shipped to you.