35
Subject to change without notice
COMP.
TESTER
POWER
PROBE
ADJ
A N A L O G S C O P E
Instruments
MENU
MENU
OFF
OFF
34
35
36
37
Further information may be found in the section ”Probe adjust-
ment and use“ in the chapter ”Operation and presettings“.
35
PROBE ADJ
(pushbutton)
This pushbutton produces the menu ”Utilities“, two options
are available:
35.1 COMP. Tester On Off.
If ”On“ is chosen a trace and a readout display ”Component
Tester“ will appear.
In this mode the 4 mm connectors labelled ”COMPONENT
TESTER“ become the measuring input. See also the chapter
”Component Tester“.
Choosing ”Off“ will return the instrument to all former set-
tings.
35.2 Calibrator 1kHz / 1MHz
Depending on the setting the square wave signal frequency at
the PROBE ADJ-socket is 1 kHz or 1 MHz.
35.3 Info
This function key opens the submenu “Utilities Information”.
It contains information about model, software, hardware and
interface (if fi tted).
36
COMPONENT TESTER
(sockets)
Both 4 mm diameter sockets serve as a two pole input for
component test. Further information can be found under section
Component Tester.
37
MENU OFF
(pushbutton)
Switches the menu display off or one step back in the menu
hierarchy.
C o n t r o l s a n d R e a d o u t
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
