ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
35
10-7 TRIGGER OUTPUTS
The camera provides a range of trigger output signals to synchronize with an external instrument and
the camera becomes the master and the external instrument becomes the slave.
There are three different trigger output functions as follows.
- Global exposure timing output
- Programmable timing output
- Trigger ready output
Also, it can output continuous High output (High output fixed) or continuous Low output (Low output
fixed). They are output from Timing out connector.
(
: enable,
−
: disable)
Normal Area Mode
Lightsheet Readout Mode
Global exposure timing output
−
*
Programmable timing output
Trigger ready output
Continuous High output (positive output)
Continuous Low output (negative output)
*
The global exposure timing output is not provided, however, because there is no timing where all lines
expose at the same time with Lightsheet Readout Mode.
(1) Global exposure timing output
It shows the global exposure timing where all lines expose at the same time. There is a case that
one event is divided into two frames because the timing of the exposure in each line is different
for the rolling shutter. However, by using the Global exposure timing output the global exposure
becomes possible for the phenomenon that happens for this period. Global exposure timing
output shows the period where all lines expose at the same time. There is no output signal when
the exposure time is less than the frame rate.
Summary of Contents for ORCA-Lighting C14120-20P
Page 2: ...Blank page...
