C13440-20CU / C13440-20CU01 Instruction manual_Ver.1.3
78
(3) Burst mode
The camera starts generating pulses inside of the camera by input trigger signal, and the camera
stops generating pulses after the specified number of pulses are generated. And then, the
camera will be ready for the next input trigger signal.
Figure 11-45 (Camera: Normal area, Edge trigger mode) (The number of pulses is specified as 3)
Master pulse
Interval setting for
master pulse
External trigger
Programmable
timing output
synchronized with
master pulse
(delay = 0 µs)
