9
ENGLISH
Introduction
This manual provides installation, operating and maintenance instructions for the
HR 1000 putty knife
cleaner
which will from now on be named
Micro Cleaner.
The HR 1000 is an innovative and completely pneumatic stainless steel cleaning installation for putty knives
and other small parts.
This manual is an integral part of the product: it must be kept clean and
stored safely for reference during the life span of the micro cleaner.
Good performance, economical
use and long life span of this product depend on following the directives of this manual.
EMM will not be held responsible for damages due to misuse or failing to follow the instructions
in this manual.
The HR 1000 has been manufactured according to the 89/392/EEC standards and
subsequent adaptations and therefore bears the CE sign.
Guarantee
On receipt of the micro cleaner inspect the packaging for transport damage and check if all accessories are
complete and undamaged. Claims must be submitted within 24 hours on receipt and the buyer is entitled to
the guarantee only if he complies with the conditions of guarantee as mentioned below.
a. EMM hereby declares that the HR 1000 stainless steel micro cleaner comes with a one year
guarantee from the date of purchase, certified by the delivery document of the supplier and when the
terms of payment have been met.
If the buyer is entitled to a claim he must refer to the serial number and if possible the production
year.
b. The guarantee includes free of charge replacement or repair of spare parts with production faults.
c. Guarantee services are carried out by the manufacturer/supplier or an authorized service centre:
the equipment should be forwarded free domicile and will be returned at EMM expense.
Replacement of defect or misused parts will be charged to the customer.
d. The manufacturer can not be held responsible for direct or indirect damage to persons or property
as a result of misuse or failing to follow directives in this manual, especially with regard to obeying
warnings concerning positioning, installing, operating and maintaining the micro cleaner.
The present guarantee does not cover compensation for direct or indirect damage as a result of
down time of the equipment.
Except in the situations mentioned, this
guarantee
becomes invalid
in the following cases :
if the micro cleaner has been misused or mishandled
if damage occurs as a result of neglect and insufficient maintenance
if damage occurs due to self-repair or adaptations without the supplier’s/E.M.M. permission or
damage due to non-original spare parts being installed
if the directives in this manual have not been not followed
if corrosive solvents have been used
