13
4.5.3 Integrating devices in the Hama Smart Solu-
tion app
•
The LED begins to flash blue quickly. If it flashes slowly or
not at all, press the Pairing button for 5 seconds.
•
Open the app and log in.
•
Press
+
in the upper-right corner to add a new device.
•
Select
Sensors
in the list.
•
Now confirm that the LED flashes quickly.
•
Next enter your WiFi password and confirm with
OK
.
Your sensor will now be connected.
•
Once the connection has been established, the LED stops
flashing quickly and the app confirms that your sensor
was connected. You can now give it a name.
•
Click
Finish
to complete the process.
•
You can now fit the sensor and then configure it.
4.6 WiFi camera
00176576/00176577
Reset
SD card slot
Microphone
Speaker
Status light
